- 名稱：WiFi Automatic
- 版本：因裝置而異
- 分類：工具
- 系統：因裝置而異
- 官網： Home
- 內容分級：3 歲以上
WiFi Automatic介紹：
This simple app can help you increase the standby time of your device: WiFi Automatic automatically disable your WiFi radio when you don’t need it and thereby lowers the battery consumption.
You can also specify to automatically turn on WiFi again, if you turn on your device or when you enter a specified location (requires a cell radio and therefore does not work on WiFi- only tablets!). Also, the app can regularly scan for available networks to connect to and re-disable WiFi if no suitable network is found. This way, you are always connected to your WiFi network when using the device.
WiFi Automatic is open source: https://github.com/j4velin/WiFi-Automatic
A WiFi connection generally uses less power than a mobile data connection, so on your phone, it makes sense to keep the WiFi radio active, whenever a WiFi network is in range
———- ———-
Permissions:
RECEIVE_BOOT_COMPLETED – is required to start the service again when rebooting your device
The following permissions are required to observe and change the WiFi state:
CHANGE_WIFI_STATE
ACCESS_NETWORK_STATE
ACCESS_WIFI_STATE
The following permissions are required to the "turn on WiFi when entering these locations" feature:
INTERNET
WRITE_EXTERNAL_STORAGE
ACCESS_COARSE_LOCATION
ACCESS_FINE_LOCATION
BILLING 這個簡單的應用程序可以幫助您提高設備的待時間： 無線自動自動禁用WiFi無線電，當你不需要它，從而降低電池消耗。
您還可以指定自動開啟無線再說，如果你把你的設備上，或當你輸入一個指定的位置（需要一個小區無線電，因此不會對WiFi的唯一工作片！ ）。另外，應用程序可以定期掃描可用的網絡來連接和重新禁用無線如果沒有合適的網絡被發現。通過這種方式，您正在使用的設備時，始終連接到WiFi網絡。
無線自動的是開源：https://github.com/j4velin/WiFi-Automatic
WiFi連接一般採用更少的功率比移動數據連接，所以你的手機上，這是有道理的，以保持WiFi無線電活躍，每當一個WiFi網絡在範圍內
—————— —
權限：
RECEIVE_BOOT_COMPLETED – 需要重新啟動設備，當再次啟動該服務
下面的權限，必須遵守和更改的WiFi狀態：
CHANGE_WIFI_STATE
ACCESS_NETWORK_STATE
ACCESS_WIFI_STATE
下面的權限要求的“進入這些場所時，打開無線網絡”功能：
互聯網
WRITE_EXTERNAL_STORAGE
ACCESS_COARSE_LOCATION
ACCESS_FINE_LOCATION
計費